The Gehl ALT950 is the flagship telescopic articulated loader, with a 143 hp diesel, a 10,974 lb tipping load, and 17 feet of lift height. When you need real reach and capacity but still want a machine that's kind to the ground, this is the top of the line.
Product views
On the job
Gehl / Articulated Loader
ALT950
17 ft 1 in
Max Lift Height
10 ft 10 in
Max Outreach
143 Hp
105 kW
Engine Power
18717
lb
Operating Weight
Lift & Reach
The numbers that decide the job. Need the full capacity-at-reach load chart for the Gehl ALT950? We'll send it with your quote.
17 ft 1 in
Max Lift Height
10 ft 10 in
Max Outreach
Features
Standard Features
- 12Volt Power Port
- Adjustable arm rests
- Articulation Locking Bar
- Cabin with Heat
- Speed control
- ECO Mode
- Electronic Hand Throttle
- Inching Pedal
- License Plate Holder
- Lift Tilt Electronic Lockout Switch
- Limited slip differential
- Multi-Function Display Screen
- Proportional Auxiliary Hydraulics w/ Case Drain & Circuit Pressure Dump
- Radio
- Removable Rubber Floormat
- Rotating Beacon
- Side View Mirrors
- Steering Column with Tilt & Extension Adjustments
- Telescopic Lift Arm with Z-Bar Bucket Linkage & Mechanical Self-Level
- Additional storage boxes
- Continuous flow hydraulics
- Oscillating front axle
Optional Features
- Auto reversing fan
- Back-Up Alarm
- Cabin with Heat and Air Conditioning
- Hydraulic "pick-up hitch" (low position)
- LED Work Lights
- Rear Auxiliary Hydraulics
- Seven Way Adjustable Air Suspension Seat
- Ecostop
Specifications
- Static tipping load with forks (straight): 10975 lb
- Static tipping load with forks (full turn): 9143 lb
- Max. payload with forks as per EN 474-3 (80%): 7275 lb
- Max. lifting height (below forks): 17 ft 1 in
- Maximum outreach: 10 ft 10 in
- Reach at max. height: 3 ft 11 in
- Breakout force with bucket: 6730 daN
- Static tipping load with pallet forks - Straight with cab: 10975 lb
- Unladen weight (with forks): 18717 lb
- Overall length to carriage (with hitch): 18 ft 9 in
- Wheelbase: 8 ft 2 in
- Overall height with cab: 8 ft 10 in
- Tilt-up angle: 9 °
- Tilt-down angle: 156 °
- Articulation angle: 44 °
- Overall width less bucket: 7 ft 6 in
- Overall length - Less Bucket: 18 ft 9 in
- Standard tires: Alliance - A580 - 460/70 R24 159A8
- Ground clearance: 1 ft 3 in
- Crowd: 3.50 s
- Dump: 2.70 s
- Brand / model: Deutz TCD 4.1 L4
- Emissions norm: Tier 4
- Number of cylinders / Capacity of cylinders: 4 - 246 in³
- Power: 143 Hp / 105 kW
- Max. torque / Engine rotation: 406 ft/lbs / 2300 rpm
- Engine cooling system: 3 radiators water + intercooler + hydraulic oil
- Transmission type: M-Varioshift
- Max. travel speed (may vary according to applicable regulations): 25 mph
- Travel speed (laden): 25 mph
- Differential lock: Limited slip differential on front and rear axles
- Parking brake: Manual
- Service brake: Oil-immersed multi-discs braking on front & rear axles
- Hydraulic pump type: Variable displacement pump
- Hydraulic flow - Pressure: 42 US gpm / 3916 PSI
- Hydraulic oil: 40 US gal
- Fuel: 40 US gal
- Diesel Exhaust fluid (AdBlue® type): 3 US gal
- Noise at driving position (LpA) tested following NF EN 12053 norm: 72 dB
- Noise to environment (LwA): 107 dB
- Vibration on hands/arms: < 8 ft/s²
- Cab certification: Cabin ROPS - FOPS level 2
Video
See it work. Manufacturer footage shows the product range in action - your machine's trim and attachments may differ. Want a closer look in person? Just ask.
Comparing options?
See how the Gehl ALT950 sizes up against the next machine up and down our lineup, or compare the whole category side by side.
Frequently asked questions
The frame pivots in the middle, so all four wheels stay planted and it turns tight without scuffing finished surfaces - great for yards, livestock and landscaping where a smooth ride and traction matter.
Yes. We run the current Manitou and Gehl factory finance programs - ask for the full rate ladder when you request a quote. Financing is subject to credit approval and we'll walk you through the options. The Q3 2026 program runs through September 30, 2026.
Yes - we deliver anywhere in Missouri. Ask about delivery when you request your quote.
Commercial equipment is quote-driven - the right number depends on your configuration, attachments, financing and any current programs. Tell us about the job and we'll put together real pricing, no guessing.
Downloads
Grab the full specs and the product brochure to share or print.
Warranty
Backed by the Gehl factory warranty. Coverage terms vary by model and how the machine is used - ask us for the current factory coverage when you request a quote.
Financing
Q3 financing offer: 0% financing for 24 months through September 30, 2026. Ask about 0% for 24 months, then 1.99%/36, 2.99%/48, 3.99%/60, or 4.99%/72 months. Subject to credit approval.
Through Manitou Finance and approved lenders. Rates shown are the current program; your rate and term depend on credit approval.
Road Service
Already own one? When it goes down on the job, we come to it. Road service for construction and ag equipment, most makes, across 15 counties in central and northeast Missouri, quoted on the phone before we roll.
Why buy from Equipment Solutions Outdoors
Your local Manitou & Gehl dealer
Authorized for the Manitou and Gehl lineup - right here in Laddonia, MO.
Talk to a real person
Call the dealership and get someone who knows these machines, not a national call center three states away.
We deliver across Missouri
Kansas City, St. Louis, Marshall, Kirksville, Jefferson City, Hannibal and the rural areas in between.
Real quotes, same business day
Tell us the job and we'll spec it and price it - no online guessing, no obligation.
Request a Quote
Tell us about the job and we'll put together pricing and current programs. No price guessing online - we quote your build.
* Specifications per manufacturer, subject to change without notice. Verify before purchase.