The Manitou M 50-4 D is a rough-terrain masted forklift with 4WD and an 11,023 lb capacity, built to work off pavement. The big flotation tires and Deutz diesel let it handle mud, gravel, and job-site dirt that would stop a warehouse truck.
M 50-4 D
Lift & Reach
The numbers that decide the job. Need the full capacity-at-reach load chart for the Manitou M 50-4 D? We'll send it with your quote.
Specifications
- Manufacturer: MANITOU
- Model Name: M 50-4 D ST5
- Power source: Diesel
- Operator type: Seated
- Max. capacity: 11023 lb
- Load center of gravity: 24 in
- Load distance, centre of drive axle to fork: 30 in
- Wheelbase: 83 in
- Standard mast reference of the machine: FVD 37
- Service weight: 18353 lb
- Weight on front axle (laden) / rear axle (laden): 25397 lb / 3979 lb
- Weight on front axle (Unladen) / rear axle (Unladen): 7242 lb / 11111 lb
- Tires type: Pneumatic
- Dimensions of front wheels: 18-22,5 MPT-06
- Dimensions of rear wheels: 340/80 R18 XMCL
- Number of front wheels / rear wheels: 2 / 2
- Number of drive wheels: 4
- Front wheel gauge: 64 in
- Rear wheel gauge: 69 in
- Height of overhead guard (cabin) / Overall height of low overhead guard (Buggie version): 98 in / 98 in
- Seat height/stand height: 57 in
- Overall length: 195 in
- Length to face of forks: 148 in
- Overall width: 82 in
- Forks section x width x length: 2 in x 6 in / 47 in
- Fork carriage ISO 2328 (class/form) A/B: 4A
- Fork carriage width: 66 in
- Ground clearance below mast: 12 in
- Ground clearance at centre of wheelbase: 17 in
- Aisle width for 1000 x 1200 pallet widthways: 268 in
- Aisle width for 800 x 1200 pallet lengthways: 268 in
- Turning radius: 183 in
- Travel speed (laden / unladen): 6 mph / 14 mph
- Lifting speed (laden / unladen): 1 ft/s / 1 ft/s
- Lowering speed (laden / unladen): 2 ft/s / 1 ft/s
- Drawbar pull (Laden): 11000 daN
- Service brake: Hydraulic
- Transmission type: Torque converter
- Engine brand / model / norm: Deutz / TCD 2,9 / Stage V
- Engine power (Hp / kW): 75 Hp/55 kW
- Rated speed: 2300 rpm
- Number of cylinders / Capacity of cylinders: 4 - 178 in³
- Working hydraulic pressure for attachments: 3336 PSI
- Oil flow rate for attachments: 14 US gpm
- Sound level at the driver's ear according to DIN 12 053: 78 dB
Video
See it work. Manufacturer footage shows the product range in action - your machine's trim and attachments may differ. Want a closer look in person? Just ask.
Comparing options?
See how the Manitou M 50-4 D sizes up against the next machine up and down our lineup, or compare the whole category side by side.
Frequently asked questions
Electric is best indoors and where clean air and low noise matter; diesel and gas suit outdoor, rough-terrain and heavy-duty yards. Our diesel vs electric guide covers the trade-offs, and we'll match capacity and mast to your lift height and door clearance.
Yes. We run the current Manitou and Gehl factory finance programs - ask for the full rate ladder when you request a quote (the Q2 2026 program runs through June 30, 2026). Financing is subject to credit approval and we'll walk you through the options.
We do, in house at our shop in Laddonia, MO. You're not shipping a machine across the country for warranty work or parts. Reach our team at (573) 321-1542.
Yes - across central and northeast Missouri, including Kansas City, St. Louis, Marshall, Kirksville, Jefferson City and Hannibal and the surrounding rural areas. Ask about delivery when you request your quote.
Commercial equipment is quote-driven - the right number depends on your configuration, attachments, financing and any current programs. Tell us about the job and we'll put together real pricing, no guessing.
Downloads
Grab the full specs and the product brochure to share or print.
Backed by the Manitou factory warranty. We handle warranty service in house at our Laddonia, MO shop - no shipping your machine across the country to get it covered.
Q2 financing offer: rates from 1.99% through June 30, 2026. Ask about 1.99% for 24 months, then 2.99%/36, 3.99%/48, 4.99%/60, or 5.49%/72 months. Subject to credit approval.
Through Manitou Finance and approved lenders. Rates shown are the current program; your rate and term depend on credit approval.
Why buy from Equipment Solutions Outdoors
Factory-backed sales, parts and warranty - right here in Laddonia, MO.
We support what we sell. No shipping your machine across the country for warranty work or parts.
Kansas City, St. Louis, Marshall, Kirksville, Jefferson City, Hannibal and the rural areas in between.
Tell us the job and we'll spec it and price it - no online guessing, no obligation.
Tell us about the job and we'll put together pricing and current programs. No price guessing online - we quote your build.
* Specifications per manufacturer, subject to change without notice. Verify before purchase.





