The Manitou ATJ 46 is an articulated boom lift with a 52 ft working height and a jointed arm that bends up and over to reach spots a straight boom can't. It's the access machine for tight, cluttered work areas where you need to thread the platform around obstacles.
Product views
Manitou / Aerial Work Platform
ATJ 46
52 ft 6 in
Working Height
46
ft
Platform Height
27 ft 3 in
Max Outreach
500
lb
Platform Capacity
24.80 Hp
18.50 kW
Engine Power
Load Chart & Dimensions
Capacity, reach, and dimensions matter on a real job. Here are the manufacturer diagrams for this machine - tap any chart to view it full size.
Specifications
- Working height: 52 ft 6 in
- Platform height: 46 ft
- Maximum outreach: 27 ft 3 in
- Overhang: 24 ft 7 in
- Pendular arm rotation (top / bottom): +65 ° / -59.50 °
- Platform capacity: 500 lb
- Turret rotation: 350 °
- Platform rotation (right / left): 90 ° / 90 °
- Number of people (indoor / outdoor): 2 / 2
- Platform weight*: 13426 lb
- Platform dimensions (length x width): 6 ft 11 in x 2 ft 7 in
- Floor height (access): 1 ft 4 in
- Overall length: 21 ft 11 in
- Overall width: 7 ft 7 in
- Overall height: 7 ft 9 in
- Overall length (stowed): 14 ft 9 in
- Overall height (stowed): 9 ft 3 in
- Counterweight offset (turret at 90°): 9 in
- Counterweight Oversize / Reach: 9 in
- External turning radius: 17 ft
- Ground clearance at centre of wheelbase: 1 ft 2 in
- Wheelbase: 7 ft 3 in
- Drive speed - stowed: 3 mph
- Drive speed - raised: 0.62 mph
- Gradeability: 45 %
- Tires type: Foam-filled
- Standard tires: 834 x 298 mm
- Drive wheels (front / rear): 2 / 2
- Steering wheels (front / rear): 2 / 0
- Braking wheels (front / rear): 0 / 2
- Engine brand / model: Kubota - D1105-E4B
- Engine norm: Interim Tier 4, Stage IIIA, Stage V
- Engine power (Hp / kW): 24.80 Hp / 18.50 kW
- Ground Pressure: 139 PSI
- Hydraulic Pressure: 4931 PSI
- Hydraulic tank capacity: 14 US gal
- Fuel: 14 US gal
- Noise to environment (LwA): < 105 dB
- Vibration on hands/arms: < 2 ft/s²
- Daily consumption **: 1 US gal
- This machine is in compliance with:: ANSI A92.20-2018 CSA B354.6 ICES-002-Issue 6 Standard Canadian EMC
*Varies according to options and standards of the country to which the machine is delivered
** According to "REDUCE cycle"
Video
See it work. Manufacturer footage shows the product range in action - your machine's trim and attachments may differ. Want a closer look in person? Just ask.
Comparing options?
See how the Manitou ATJ 46 sizes up against the next machine up and down our lineup, or compare the whole category side by side.
Frequently asked questions
Scissor lifts go straight up for platform work over a wide deck; boom lifts add horizontal outreach to get up and over obstacles. Size by working height and platform capacity - our scissor vs boom guide helps.
Yes. We run the current Manitou and Gehl factory finance programs - ask for the full rate ladder when you request a quote. Financing is subject to credit approval and we'll walk you through the options. The Q3 2026 program runs through September 30, 2026.
Yes - we deliver anywhere in Missouri. Ask about delivery when you request your quote.
Commercial equipment is quote-driven - the right number depends on your configuration, attachments, financing and any current programs. Tell us about the job and we'll put together real pricing, no guessing.
Downloads
Grab the full specs and the product brochure to share or print.
Warranty
Backed by the Manitou factory warranty. Coverage terms vary by model and how the machine is used - ask us for the current factory coverage when you request a quote.
Financing
Q3 financing offer: rates from 1.99% through September 30, 2026. Ask about 1.99% for 24 months, then 2.99%/36, 3.99%/48, 4.99%/60, or 5.49%/72 months. Subject to credit approval.
Through Manitou Finance and approved lenders. Rates shown are the current program; your rate and term depend on credit approval.
Road Service
Already own one? When it goes down on the job, we come to it. Road service for construction and ag equipment, most makes, across 15 counties in central and northeast Missouri, quoted on the phone before we roll.
Why buy from Equipment Solutions Outdoors
Your local Manitou & Gehl dealer
Authorized for the Manitou and Gehl lineup - right here in Laddonia, MO.
Talk to a real person
Call the dealership and get someone who knows these machines, not a national call center three states away.
We deliver across Missouri
Kansas City, St. Louis, Marshall, Kirksville, Jefferson City, Hannibal and the rural areas in between.
Real quotes, same business day
Tell us the job and we'll spec it and price it - no online guessing, no obligation.
Request a Quote
Tell us about the job and we'll put together pricing and current programs. No price guessing online - we quote your build.
* Specifications per manufacturer, subject to change without notice. Verify before purchase.