The Manitou MI 30 D is the bigger diesel forklift in the MI line, rated at 6,614 lb for heavier outdoor loads. When the MI 25 D runs a little short on capacity, this is the one we'd move you up to.
Product views
Manitou / Forklift
MI 30 D
6614
lb
Max Capacity
51 Hp
37.40 kW
Engine Power
10163
lb
Operating Weight
Diesel
Power Source
Lift & Reach
The numbers that decide the job. Need the full capacity-at-reach load chart for the Manitou MI 30 D? We'll send it with your quote.
6614
lb
Max Capacity
Specifications
- Manufacturer: MANITOU
- Model Name: MI 30 D ST5 US
- Power source: Diesel
- Operator type: Seated
- Max. capacity: 6614 lb
- Load center of gravity: 20 in
- Load distance, centre of drive axle to fork: 19 in
- Wheelbase: 67 in
- Service weight: 10163 lb
- Weight on front axle (laden) / rear axle (laden): 14661 lb / 2116 lb
- Weight on front axle (Unladen) / rear axle (Unladen): 4101 lb / 6063 lb
- Tires type: Solid tires
- Dimensions of front wheels: 28-9-15 12
- Dimensions of rear wheels: 6.50-10 10
- Number of front wheels / rear wheels: 2 / 2
- Number of drive wheels: 2
- Front wheel gauge: 40 in
- Rear wheel gauge: 38 in
- Seat height/stand height: 48 in
- Height of overhead guard (cabin): 84 in
- Height of towing bar (coupling height): 14 in
- Overall length: 152 in
- Length to face of forks: 107 in
- Overall width: 48 in
- Overall width - Single wheels: 48 in
- Overall width - Twinned wheels: 68 in
- Forks section / width / length: 2 in x 5 in x 45 in
- Fork carriage ISO 2328 (class/form) A/B: 3A
- Fork carriage width: 43 in
- Ground clearance below mast: 5 in
- Ground clearance at centre of wheelbase: 8 in
- Aisle Width for pallets 1000 x 1200 crossways: 163 in
- Aisle width for 800 x 1200 pallet lengthways: 171 in
- Turning radius: 97 in
- Internal turning radius (over tyres): 6 in
- Travel speed (laden / unladen): 11 mph-11 mph
- Lifting speed (laden / unladen): 2 ft/s-2 ft/s
- Lowering speed (laden / unladen): 1 ft/s-2 ft/s
- Drawbar pull (Laden / Unladen): 1950 daN / 1380 daN
- Gradeability (laden / unladen): 20 % / 20 %
- Service brake: Hydraulic
- Engine brand / model / norm: Kubota / V2607-CR-E5B / Stage V
- Engine power (Hp / kW): 51 Hp/37.40 kW
- Rated speed: 2400 Hz
- Number of cylinders / Capacity of cylinders: 4 - 160 in³
- Working hydraulic pressure for attachments: 2321 PSI
- Oil flow rate for attachments: 9 US gpm
- Measured/guaranteed mean noise level at the ear of the operator: < 84 dB
Video
See it work. Manufacturer footage shows the product range in action - your machine's trim and attachments may differ. Want a closer look in person? Just ask.
Comparing options?
See how the Manitou MI 30 D sizes up against the next machine up and down our lineup, or compare the whole category side by side.
Frequently asked questions
Electric is best indoors and where clean air and low noise matter; diesel and gas suit outdoor, rough-terrain and heavy-duty yards. Our diesel vs electric guide covers the trade-offs, and we'll match capacity and mast to your lift height and door clearance.
Yes. We run the current Manitou and Gehl factory finance programs - ask for the full rate ladder when you request a quote. Financing is subject to credit approval and we'll walk you through the options. The Q3 2026 program runs through September 30, 2026.
Yes - we deliver anywhere in Missouri. Ask about delivery when you request your quote.
Commercial equipment is quote-driven - the right number depends on your configuration, attachments, financing and any current programs. Tell us about the job and we'll put together real pricing, no guessing.
Downloads
Grab the full specs and the product brochure to share or print.
Warranty
Backed by the Manitou factory warranty. Coverage terms vary by model and how the machine is used - ask us for the current factory coverage when you request a quote.
Financing
Q3 financing offer: rates from 1.99% through September 30, 2026. Ask about 1.99% for 24 months, then 2.99%/36, 3.99%/48, 4.99%/60, or 5.49%/72 months. Subject to credit approval.
Through Manitou Finance and approved lenders. Rates shown are the current program; your rate and term depend on credit approval.
Road Service
Already own one? When it goes down on the job, we come to it. Road service for construction and ag equipment, most makes, across 15 counties in central and northeast Missouri, quoted on the phone before we roll.
Why buy from Equipment Solutions Outdoors
Your local Manitou & Gehl dealer
Authorized for the Manitou and Gehl lineup - right here in Laddonia, MO.
Talk to a real person
Call the dealership and get someone who knows these machines, not a national call center three states away.
We deliver across Missouri
Kansas City, St. Louis, Marshall, Kirksville, Jefferson City, Hannibal and the rural areas in between.
Real quotes, same business day
Tell us the job and we'll spec it and price it - no online guessing, no obligation.
Request a Quote
Tell us about the job and we'll put together pricing and current programs. No price guessing online - we quote your build.
* Specifications per manufacturer, subject to change without notice. Verify before purchase.